Meters to Feet

Converting metres to feet bridges the metric world and the American imperial world, because building plans, science, and sports use metres while American construction, real estate, and everyday height use feet. One metre equals 3.28084 feet, so the conversion is a single multiplication. The free length converter above does it instantly, and this page gives you the formula, the worked examples, and the tables for the heights and room sizes people convert most.

You need metres to feet when you read a European floor plan, check a ceiling height, compare your height with a metric chart, or work out whether furniture fits a room measured in metres. A 2-metre doorway is about 6.56 feet tall, a 3-metre ceiling is about 9.84 feet, and a 10-metre room is about 32.81 feet long. The examples below show the multiplication for the values that come up most, so you can trust the number before you buy, build, or book.

How Length Conversion Works

Length conversion is multiplication by a fixed factor, because every length unit is defined as an exact multiple of the metre. One mile is defined as exactly 1,609.344 metres, one inch as exactly 2.54 centimetres, and one foot as exactly 0.3048 metres. Since the factors are exact by definition, converting is not an estimate: 5 miles is 8.04672 kilometres, every time, with no rounding in the definition itself. The only rounding happens when you choose how many decimal places to display, which is why the length converter above lets you pick 2, 4, or 6 decimal places.

The two systems in everyday use are the metric system, built on the metre, and the imperial system, built on the inch, foot, yard, and mile. The United States uses imperial units for road distances, heights, and construction, while science, most of the world, and most product specifications use metric units. That split is exactly why conversions come up so often: a running race is 26.2 miles in the United States and 42.195 kilometres everywhere else, a television is sold by its diagonal in inches but its manual lists centimetres, and a hiking trail can be signed in miles while your fitness app records kilometres.

Step-by-step: how to convert

1. Pick the unit you are starting from. Check whether your number is in miles, feet, inches, yards, millimetres, centimetres, metres, kilometres, or nautical miles, and select it in the From box.
2. Pick the unit you want. Choose the target unit in the To box. The Swap button exchanges the two units if you need the reverse direction.
3. Enter the value. Type the number, including decimals if you have them. The result updates as you type, so there is nothing to submit.
4. Choose your precision. Use 2 decimal places for everyday answers, 4 for workshop or classroom work, and 6 when the result feeds another calculation.
5. Read the full result. The calculator shows the converted value plus the same length in the other common units, so you can copy whichever form you need.

The Length Conversion Formulas

Every length conversion follows the same pattern: multiply by the factor that relates the two units. To convert miles to kilometres, multiply miles by 1.609344. To convert inches to centimetres, multiply inches by 2.54. To convert metres to feet, multiply metres by 3.28084, and to convert centimetres to inches, divide centimetres by 2.54, which is the same as multiplying by 0.393701. Going the other way uses the inverse: divide kilometres by 1.609344 to get miles, or divide centimetres by 2.54 to get inches.

A worked check keeps the arithmetic honest. Ten miles times 1.609344 equals 16.09344 kilometres, so a 10-mile run is a 16.09-kilometre run. Twelve inches times 2.54 equals 30.48 centimetres, which is why a foot is exactly 30.48 centimetres. One metre times 3.28084 equals 3.28084 feet, so a 2-metre doorway is about 6.56 feet tall. Because the factors are exact, you can verify any result by converting back: 16.09344 divided by 1.609344 returns exactly 10 miles.

Worked Examples

The table below converts the metre values people look up most. Each row multiplies metres by 3.28084, so you can follow the arithmetic and check the pattern.

The 100-metre row is a good check: 100 times 3.28084 equals 328.084 feet, which rounds to 328.08 feet. A 100-metre sprint is therefore about 328 feet, or just over a football field, which is 300 feet plus the two end zones. For a quick estimate, remember that one metre is about 3.28 feet, so 2 metres is about 6.5 feet and 3 metres about 10 feet.

Length Units Reference Table

The table below lists the exact factor for each unit against the metre, plus the value of one unit in the most common partner unit. These are the definitions the calculator uses, and they agree with the international system of units maintained by the standards bodies.

Common Values at a Glance

Heights, ceilings, and room dimensions are the measurements that need metres to feet most often. These pairs cover the sizes you will meet in floor plans and product listings.

Common Mistakes to Avoid

Most wrong length conversions come from a small set of slips. They are easy to make because the numbers look plausible even when they are wrong, so check your answer against this list before you trust it.

• Multiplying when you should divide. Converting miles to kilometres multiplies by 1.609344, but converting kilometres to miles divides by the same number. Using the wrong direction gives an answer that is off by a factor of about 2.59.
• Mixing feet and inches. Five feet 9 inches is 69 inches, not 5.9 feet. Convert feet and inches to total inches first, then convert.
• Confusing the nautical mile with the statute mile. A nautical mile is 1,852 metres, while a statute mile is 1,609.344 metres. Aviation and sailing use nautical miles; road distances use statute miles.
• Rounding in the middle. Round only the final answer. Rounding 1.609344 to 1.6 early turns a 26.2-mile marathon into 41.92 kilometres instead of the correct 42.16 kilometres.
• Reading the wrong column. Centimetres and millimetres differ by a factor of 10, and metres and kilometres by a factor of 1,000. A 180-centimetre person is 1.8 metres, not 180 metres.
• Forgetting the unit on the answer. A bare number such as 16.09 is meaningless without its unit. Always write the unit next to the result.

When You Need This Conversion

Length conversion shows up in ordinary life far more often than most people expect, because the United States and the rest of the world measure the same things in different units. Any time a number crosses that border, it needs converting.

• Travel and driving. Speed limits, road signs, and rental-car dashboards switch between miles and kilometres at the border, and a quick conversion keeps you legal and on schedule.
• Running and cycling. Race distances, training plans, and cycling computers are published in both systems, and converting lets you follow a plan written in the other unit.
• Home projects. Lumber, fabric, and flooring are sold in feet and inches in the United States, while many instructions, patterns, and online guides give metric sizes.
• Shopping online. Clothing sizes, screen diagonals, and furniture dimensions are listed in centimetres by international sellers and in inches by American ones.
• School and science. Textbooks, lab work, and engineering drawings use metric units, while everyday American life uses imperial ones, so students convert constantly.

Tips for Accurate Results

A few habits make every length conversion reliable, whether you use the calculator above or work it out by hand.

1. Sanity-check the direction. Kilometres are smaller than miles in count, so the kilometre number should be bigger: 5 miles is about 8 kilometres, never about 3.
2. Remember two anchor facts. One mile is about 1.6 kilometres, and one inch is exactly 2.54 centimetres. Those two anchors catch most errors.
3. Keep full precision until the end. Let the calculator carry the decimals and round only the number you write down or cut to.
4. Convert back as a check. Convert your answer back to the original unit. If you do not land on your starting number, something went wrong.
5. Match precision to the job. A road-trip estimate needs one decimal place; a machine part needs four or more. Extra digits on an estimate are false precision.

Related Tools

Try the main length converter for any value, or explore related tools on this site: area converter, speed converter, weight converter, time calculator. The definition of the metre from the National Institute of Standards and Technology is the authoritative reference behind the conversion factors used here.

Frequently Asked Questions

How many feet is 1 metre?

One metre is 3.28084 feet, usually rounded to 3.28 feet. Multiply metres by 3.28084 to get feet.

What is 2 metres in feet?

Two metres is 6.56 feet. The calculation is 2 times 3.28084, which equals 6.56168, rounded to 6.56 feet.

How tall is 1.8 metres in feet and inches?

A height of 1.8 metres is 5 feet 11 inches. Multiply 1.8 by 3.28084 to get 5.9055 feet, which is 5 feet plus 0.9055 of a foot, and 0.9055 times 12 is 10.87 inches, so about 5 feet 11 inches.

How do I convert metres to feet in my head?

Multiply metres by 3.3 for a fast estimate. For 2 metres that gives 6.6 feet, close to the exact 6.56 feet. For an exact answer, multiply by 3.28084.

What is 10 metres in feet?

Ten metres is 32.81 feet. The calculation is 10 times 3.28084, which equals 32.8084, rounded to 32.81 feet.

Why do I need metres to feet?

Floor plans, product dimensions, and scientific data often use metres, while American homes, construction, and everyday height use feet. Converting lets you compare the two directly before you buy or build.

Disclaimer: This calculator is for general information only. Conversion factors are standard definitions; always confirm critical measurements with a calibrated instrument or an official reference before relying on them for safety, legal, or engineering decisions.